1. In CNC precision hardware parts processing. Operators are required to maintain the correct posture, with plenty of spirit to cope with work must concentration when operating, it is forbidden to chat and cooperate with each other, the operator do not operate under state of irritability, fatigue, for the sake of personal safety, avoid accidents, ensure the operation safety. All employees check whether their clothes meet the work requirements before entering the job. Do not wear slippers, high heels or clothes that affect safety. Wear a safety helmet if you have long hair.
2. check the movement part in front of the mechanical action is filling the oil, then start normal and check whether the clutch, brake, and the machine idle running 1-3 minutes, mechanical failure operation is strictly prohibited.
3. When starting the power to start the machine, it must wait for all other personnel to leave the mechanical work area and remove the sundries on the working table before starting.
4. When the machine is working, it is forbidden to extend the hand into the sliding block work area, and it is forbidden to use the hand to pick up and release the work pieces. The tools that conform to the standards must be used when taking and releasing parts in the die. In case of abnormal sound or machine failure, power switch should be turned off immediately for inspection. After machine, by one person and mechanical operation, others may not push in turbine or stamped on the pedal switch board, cannot put hand in more machinery for others safety workspace or hand touches mechanical moving parts.
5. When replacing the mold, first turn off the power, and after the press movement department stops running, the installation and debugging of the mold can begin. Installed after the adjustment, with the hand move the flywheel try twice, in order to avoid mechanical and unnecessary to collide to processing products, up and down mould must check whether symmetrical and reasonable, screw whether solid, blank holder ring is in a reasonable position.
Above is ChengHao hardware summed up some considerations about the precision metal parts processing, hope everyone through the above study, can have a further understanding of precision metal processing process, also want to remind you when making automatic lathe hardware processing must pay attention to safety.